Your logo as an emblem

For scooter clubs, associations, workshops and meet-ups: upload your logo, choose shape, size and colours. The preview shows the emblem exactly as it will be printed – raised in up to four colours, optionally with an NFC chip.

ASA, 2–4 coloursUV-resistant, smoothed with acetone
Raised logoeach colour one level higher
Optional NFCtap a phone → your website

Logo Choose a logo file or drop it here PNG, JPG or SVG, up to 15 MB. Ideally with a transparent or plain background.

Sample logo

Shape

Raised frame around the edge (in the first logo colour)

Size Longest side or diameter 60 mm

Standard 60 mm. Smaller is cheaper (up to −€2 per piece); each started 10 mm larger costs €2 more.

Colours Colours in the logo (without background)

The small pictures show which part of the logo is printed in which colour. Assign a filament to each detected colour. Same colour as the plate = part of the plate. Standard is 2 colours (plate + logo); the 3rd and 4th colour cost €6 each per order. Colours marked ◷ are currently out of stock – delivery takes longer.

NFC Build in an NFC chip (+€3 per piece, from 35 mm)

Quantity

Your design code

The code contains all settings and a fingerprint of your logo file. I use it to produce exactly this preview.

I have the right to have this logo reproduced (own logo or permission of the rights holder). I understand: the emblem is made to my specifications, so there is no right of withdrawal.

Option A: Order directly from ScootTec (prepayment)

On the next page you attach the same logo file, enter your address and, if needed, the NFC link, and see the total before placing a binding order.

Continue to order

Question or special request? Send a non-binding enquiry

Option B: Order via Etsy

To the Etsy shop – open the “Logo emblem” listing there.

Choose this on Etsy: –.
Paste your design code (“Copy” above) into the personalisation field, with NFC also the destination link.
After buying, send the logo file via Etsy message.

Etsy offers packs of 1, 5, 10 or 30 pieces up to 60 mm. Other quantities, larger emblems and the link subscription directly here (option A).

Club emblem and association logo from the 3D printer

For scooter clubs, Lambretta fans, regulars’ tables, workshops or companies: your logo becomes a raised emblem to stick on – for the leg shield, helmet, garage or as an anniversary gift. Each colour sits one level higher, so the logo looks three-dimensional.

Prices and quantity discounts

1 piece €30, from 2 pieces €17.90, from 5 €15, from 10 €12.99, from 30 €10.99, from 100 €9.99 per piece (60 mm, 2 colours, shipping within Germany included). 3rd and 4th colour €6 each per order, NFC chip €3 per piece.

NFC emblem with a changeable link

With an NFC chip, the emblem opens your website, Instagram or the next ride-out on a phone. The link runs via scoottec.de – so the destination can be changed later without replacing the emblem.

Material

Printed in ASA: UV-resistant and dimensionally stable up to about 95 °C. After printing the surface is smoothed with acetone – this closes the print lines and gives a slight sheen. With 3M adhesive tape on the back.

Own logos only

I only print logos you hold the rights to. I don’t print third-party brand logos (e.g. of vehicle manufacturers) – references such as “for Vespa” in a club name are fine.